PAT testing for workshops — original sector illustration by PatTest.com

Premises we test

PAT testing for workshops

A workshop is dust, vibration and sharp edges. Saws throw swarf, sanders fill the air with fine dust, and extractors pull it through a hose all day. Leads are dragged over concrete, coiled around machines and pinned under offcuts. It is exactly the environment where insulation fails quietly.

PAT testing for workshops is about catching that failure before a machine bites. We test on site, at the bench, without dismantling your setup. Every item gets a visual check and the appropriate tests, a clear pass or fail label, and a place in an itemised PDF certificate. Small faults — a plug, a fuse, a damaged lead — are usually fixed on the day.

Why a workshop needs its equipment tested

Dust gets into everything. Wood dust and metal dust clog vents, coat switches and work their way into plug tops. A machine that looks clean on the outside can have a plug full of debris.

Vibration loosens connections. Sanders, saws, grinders and breakers shake their own cables loose. Terminal screws work free, cable grips loosen and the flex starts to move inside the plug. That is where intermittent faults come from.

Leads live on the floor. Trailing leads get run over by pallet trucks, caught under benches and dragged through puddles. A split sheath is easy to miss when the workshop is busy and the light is poor.

One failed machine stops a job. A dead extractor means you cannot sand. A dead saw means the bench is idle. Testing finds weak items before they stop a deadline, and we carry common plugs and fuses to fix simple faults on the spot.

Staff and visitors share the space. Apprentices, delivery drivers, customers and cleaners all walk through a workshop. A damaged lead on the floor is a hazard for everyone, not just the person using the machine.

Insurers and clients may ask for evidence. Many workshop policies and some client contracts ask for proof that equipment is maintained. A certificate on file is the easy answer.

What we test in a workshop

We test what plugs in. Typical workshop equipment includes:

  • Table saws, mitre saws, band saws and circular saws
  • Bench drills, pillar drills and magnetic drills
  • Sanders, planers, routers and jointers
  • Lathes, milling machines and metalworking kit
  • Welders, plasma cutters and their power supplies
  • Compressors and air tools with mains supply
  • Extractors, dust collectors and air filtration units
  • Bench grinders, polishers and sharpening machines
  • Task lights, lead lights and inspection lamps
  • Heaters, fans and dehumidifiers
  • Extension leads, reels, adaptors and bench sockets
  • Kettle, microwave and fridge in the brew room
  • Office and reception kit: computer, printer, card reader

Anything with a mains plug can be tested. Hard-wired machines, fixed extractors and three-phase equipment need separately agreed testing — tell us what you have and we will quote. 110V site equipment can be included by arrangement.

What happens on the day

  1. Book a slot at book online or by phone. Early morning, after hours or a shutdown day all work.
  2. Tell us the count. Roughly how many machines and leads, and whether any are hard-wired or three-phase.
  3. We test at the bench. Visual check, then the appropriate tests. Every item labelled, every result recorded against the machine and its location.
  4. You get the certificate. PDF by email, itemised, with failures explained and advice on repair or replacement.

We work around jobs in progress. If a machine is set up for a cut, we come back to it. If it cannot be unplugged safely mid-job, we agree a time and record it as deferred rather than marking it passed.

Simple, fixed pricing

Every visit includes travel, testing, pass and fail labels, small repairs needed to pass, new plugs and fuses, and the certificate by email.

  • 1–20 items: £49 + VAT
  • 20–50 items: £59 + VAT
  • 50–200 items: first 50 items £59 + VAT, then 89p + VAT per extra item
  • 200+ items: first 50 items £59 + VAT, then 79p + VAT per extra item
  • 2,000+ items: call for a bulk quote

See prices for the bands and PAT testing for what is covered.

A small joinery or metal shop usually lands in the second band. Larger workshops with dozens of machines and leads pay 89p + VAT per item after the first 50, which keeps a full test affordable.

Why workshops choose PatTest.com

  • Testing at the bench. No dismantling, no courier, no machine out of action for a week. We work around the job in progress.
  • Hard-wired and three-phase quoted clearly. Tell us what is fixed and what is 110V, and the price is agreed before we arrive.
  • Dust and vibration experience. We know where the damage hides on saws, sanders, extractors and grinders — usually at the plug top and cable grip.
  • Early starts, evenings and weekends. At no extra cost, so production keeps moving.
  • Family-run since 2014. Ryan Facer founded the company after years maintaining critical hospital equipment. City & Guilds 2377 trained and insured.
  • Fire safety for the unit. Extinguishers, alarms, emergency lights and fire risk assessment, alongside PAT.

Questions workshop owners ask

How much does PAT testing for a workshop cost? £49 + VAT covers up to 20 items and £59 + VAT covers up to 50. After that it is 89p + VAT per item. Travel, labels, small repairs and the certificate are included.

Can you test three-phase machines? Yes, by arrangement. Tell us what you have when you book so we bring the right equipment.

Do you test 110V site tools? Yes, by arrangement. Bring them to the workshop or tell us they are on site.

How often should a workshop be tested? Most workshops book annually. Machines used daily, or leads dragged across concrete, often justify a six-month check. We will recommend based on your setup.

Will you interrupt a job in progress? No. We work around it, come back to anything in use, and record anything we cannot access rather than marking it as passed.

What happens if a machine fails? It is labelled, taken out of use and reported. Plugs and fuses are often fixed on the spot; anything more serious is listed so you can repair or replace before it costs you a deadline.

We cover Northamptonshire, Leicestershire, Milton Keynes, Bedford, Warwickshire, Nottinghamshire, Oxfordshire, Wiltshire, Birmingham, Reading, Bristol, Derby and Luton, with engineers nationwide for multi-site workshops. Call 03333 444 722, email info@pattest.com or book at book online with your machine count.