PAT testing for restaurants and takeaways — original sector illustration by PatTest.com

Premises we test

PAT testing for restaurants and takeaways

Service starts at six. The fridge has been running since yesterday, the coffee machine since seven this morning, and the till has been on since the first customer. If any one of them fails now, you are not fixing a plug — you are losing covers, stock or both.

PAT testing for restaurants is about finding the weak items before the dinner rush, not during it. We test on site, before you open or after you close, label everything, fix small faults on the spot and email you an itemised certificate. No shutting the kitchen, no sending equipment away, no lost service.

Why a restaurant needs its equipment tested

Heat, grease and water are relentless. A kitchen is the hardest environment in any building. Oil coats cables, steam works its way into switches, and staff wash down surfaces with wet cloths around plugged-in equipment. Insulation and connections degrade quietly.

The fridges never stop. A commercial fridge or freezer runs 24 hours a day, every day. Constant cycling wears the compressor and its supply, and a failed unit can cost you a full stock load before anyone notices the temperature climbing.

Kit gets moved and knocked. Blenders, mixers, processors and hot-holds are shifted between stations, stacked on shelves and cleaned in a hurry. Plugs get pulled by the flex because the socket is behind a counter.

Staff change, habits don't. New kitchen staff bring new ways of plugging things in. Extension leads get daisy-chained, a plug gets forced into a socket the wrong way, and nobody reports the crack in the casing because the equipment still works.

One failure stops service. A dead till, a tripped circuit or a coffee machine that will not heat means customers waiting and staff improvising. Testing finds the weak items on a quiet Tuesday instead of a busy Friday.

Customers see the front of house. They may not see the kitchen, but they see the till, the card reader, the lights and the coffee machine. Tidy, labelled equipment looks professional. A taped-up lead behind the counter does not.

What we test in a restaurant, café or takeaway

We test what plugs in. A typical visit covers:

  • Commercial fridges, freezers, undercounter units and display fridges
  • Microwaves, combi ovens, bain-maries and hot-holding cabinets
  • Coffee machines, grinders, blenders and mixers
  • Food processors, slicers, vacuum packers and sous-vide units
  • Dishwashers and glasswashers
  • Ice machines and drinks dispensers
  • Scales, label printers and temperature probes with mains adaptors
  • EPOS tills, card readers, printers and kitchen display screens
  • Extractors, fly killers and air purifiers where plug-in
  • Radios, speakers, televisions and background music systems
  • Fans, heaters and dehumidifiers
  • Extension leads, reels and adaptors
  • Staff phone chargers and vacuums

Anything with a mains plug can be tested. Hard-wired equipment — large ovens, fryers, extraction systems, three-phase kitchen kit — needs separately agreed testing. Tell us what is fixed and we will quote before the visit.

What happens on the day

  1. Book a slot at book online or by phone. Choose before opening, after close or a quiet afternoon.
  2. Tell us the count. Roughly how many items and where they are — kitchen, bar, front of house, storeroom.
  3. We test on site. Visual check, then the appropriate tests. Every item labelled, every result recorded against its station.
  4. You get the certificate. PDF by email, itemised, with failures explained and advice on repair or replacement.

We work around prep. If a fridge cannot be unplugged without risking stock, we agree a time and come back rather than forcing it. If a machine is mid-service, we return to it.

Simple, fixed pricing

Every visit includes travel, testing, pass and fail labels, small repairs needed to pass, new plugs and fuses, and the certificate by email.

  • 1–20 items: £49 + VAT
  • 20–50 items: £59 + VAT
  • 50–200 items: first 50 items £59 + VAT, then 89p + VAT per extra item
  • 200+ items: first 50 items £59 + VAT, then 79p + VAT per extra item
  • 2,000+ items: call for a bulk quote

A small café usually lands in the first or second band. A busy restaurant with a full kitchen sits in the third. Groups with several sites can book them on consecutive days and pay one travel cost.

Full details are on the prices page, and the PAT testing service explains what the visit covers.

Why restaurants choose PatTest.com

  • We test around service, not through it. Early mornings, after close, or the quiet hours between lunch and dinner. No lost covers.
  • Kitchen-grade knowledge. We know where grease and steam do the damage — at the plug top, behind the fryer, under the counter.
  • Family-run since 2014. Founded by Ryan Facer, an electrical engineer with a hospital-equipment background. Practical, not corporate.
  • Qualified and insured. City & Guilds 2377 trained engineers, fully insured, used to working in busy food premises.
  • Small faults fixed on the day. New plug, new fuse, re-terminated lead — sorted there and then where it is safe.
  • One firm for the whole site. Fire extinguisher servicing, fire alarm servicing, emergency light testing and fire risk assessments alongside PAT.

Questions restaurant owners ask

How much does PAT testing for a restaurant cost? £49 + VAT covers up to 20 items and £59 + VAT covers up to 50. After that it is 89p + VAT per item. Travel, labels, small repairs and the certificate are included.

Can you test before we open? Yes. Early morning is often the easiest slot for a kitchen, and out-of-hours visits cost no more.

Do you test fridges and freezers? Yes, including undercounter and display units. We can work around stock if a unit cannot be switched off for long.

How often should a restaurant be tested? Most restaurants book annually. Kit used all day in a hot, wet kitchen may justify a six-month check. We will recommend based on your setup.

Do you test hard-wired kitchen equipment? It is quoted separately. Tell us what is fixed — ovens, fryers, extraction — when you book.

What happens if something fails? It is labelled, taken out of use and reported. Plugs and fuses are often fixed on the spot; anything more serious is listed so you can repair or replace before service.

We cover Northamptonshire, Leicestershire, Milton Keynes, Bedford, Warwickshire, Nottinghamshire, Oxfordshire, Wiltshire, Birmingham, Reading, Bristol, Derby and Luton, with engineers nationwide for multi-site groups. Call 03333 444 722, email info@pattest.com or book at book online with your item count.