PAT testing for laundrettes and dry cleaners
A laundrette is heat, water and steam in a room full of machines that run from morning to night. Washers and dryers cycle constantly, presses and steamers run hot, and customers use the change machine, the vending machine and the seating area while they wait.
PAT testing for laundrettes is about checking all of that without closing the shop. We test washers, dryers, presses, irons, steamers, change machines and the customer area, label everything, fix small faults and give you an itemised certificate for the premises.
Why a laundrette or dry cleaner needs its equipment tested
Heat and water never stop. Commercial washers and dryers run at high temperatures with steam and condensation around them. Cables, plugs and control panels sit in that environment all day.
Machines are heavy and vibrate. Spin cycles shake the floor and work connections loose. A cable that was secure at installation can work free over months of vibration.
Presses and steamers are used close to the body. A dry-cleaning press or a garment steamer is operated by hand, at chest height, with a cable that flexes every time the operator moves. That is exactly where damage starts.
Customers use the equipment too. Change machines, vending machines, card readers and seating-area sockets are handled by the public. A damaged socket or a loose faceplate is a risk to someone who does not know the shop.
Many machines are hard-wired. Large washers, dryers and presses are often wired into a spur rather than plugged in. Those need a separate arrangement, and it is easy to assume a PAT visit covers them when it does not.
One failure stops the service. A dead dryer on a Saturday means wet washing, unhappy customers and a queue. Testing finds the weak items before they fail, and we can replace a plug or fuse on the spot.
What we test in a laundrette or dry cleaner
We test what plugs in, plus the customer-facing kit.
- Commercial washers and dryers where plug-in
- Rotary presses, ironing tables and steam generators
- Hand irons, steam irons and garment steamers
- Spotting tables and cleaning guns
- Change machines, coin boxes and card readers
- Vending machines, coffee machines and fridges
- Tills, computers, printers and label printers
- Dehumidifiers, fans and air movers
- Vacuums, polishers and cleaning equipment
- Customer seating-area sockets and phone chargers
- Extension leads, reels, adaptors and multi-way sockets
- Security and CCTV power supplies
Anything with a mains plug can be tested. Hard-wired equipment — large washers, dryers, presses, three-phase machines, fixed heating — needs separately agreed testing. Tell us what is fixed and we will quote before the visit.
What happens on the day
- Book a slot at book online or by phone, ideally before opening or after the last wash.
- Tell us the count and the layout. Machines, presses, customer area, office and back room.
- We test on site. Visual check, then the appropriate tests. Every item labelled, every result recorded by area.
- You get the certificate. PDF by email, itemised, with failures explained and advice on repair or replacement.
We work around customers and cycles. If a machine cannot be unplugged safely mid-cycle, we agree a time and come back rather than marking it passed.
Simple, fixed pricing
Every visit includes travel, testing, pass and fail labels, small repairs needed to pass, new plugs and fuses, and the certificate by email.
- 1–20 items: £49 + VAT
- 20–50 items: £59 + VAT
- 50–200 items: first 50 items £59 + VAT, then 89p + VAT per extra item
- 200+ items: first 50 items £59 + VAT, then 79p + VAT per extra item
- 2,000+ items: call for a bulk quote
A small dry cleaner usually lands in the first or second band. A busy laundrette with rows of machines sits in the third or fourth, where the 79p rate applies after the first 50 items.
Full details are on prices, and the service is explained on PAT testing.
Why laundrettes choose PatTest.com
- Customer kit included. Change machines, card readers, vending and seating-area sockets are part of the visit, not an afterthought.
- Built for heat and vibration. We know where commercial washers, presses and steamers fail — at the flex entry, the plug top and the control panel.
- Hard-wired rows quoted up front. Washers and dryers are often wired in, so the fixed side is agreed before we arrive rather than discovered on the day.
- Open early or stay late. Before the first wash or after the last cycle, at no extra cost.
- Local firm, hospital-trained founder. Ryan Facer started the company in 2014 after years maintaining critical hospital equipment. City & Guilds 2377 trained and fully insured.
- Small faults sorted on site. New plug, new fuse or re-terminated lead where it is safe to do so.
Questions laundrette owners ask
How much does PAT testing for a laundrette cost? £49 + VAT covers up to 20 items and £59 + VAT covers up to 50. After that it is 89p + VAT per item. Travel, labels, small repairs and the certificate are included.
Do you test commercial washers and dryers? Yes, where they plug in. Hard-wired and three-phase machines are quoted separately.
Can you test before we open? Yes. Early morning and after-close slots cost no more, and they avoid disrupting customers.
How often should a laundrette be tested? Most premises book annually. Machines used all day in a hot, wet room may justify a six-month check.
Do you test change machines and vending kit? Yes — they are customer-facing, high-use and often overlooked.
What happens if something fails? It is labelled, taken out of use and reported. Plugs and fuses are often fixed on the spot; anything more serious is listed so it can be repaired or replaced before it stops the service.
We cover Northamptonshire, Leicestershire, Milton Keynes, Bedford, Warwickshire, Nottinghamshire, Oxfordshire, Wiltshire, Birmingham, Reading, Bristol, Derby and Luton, with engineers nationwide for multi-site operators. Call 03333 444 722, email info@pattest.com or book at book online with your machine count.