PAT testing for construction sites
By seven o'clock the site is running: breakers, grinders, saws, transformers and extension leads across three floors, with a welfare cabin serving tea to twenty people. Every one of those items has been dragged, dropped or borrowed since the last time anyone looked at it.
PAT testing for construction sites is about checking the kit where it is used, not sending it back to a depot. We test 110V tools, transformers, leads and cabin equipment on site, label everything, replace what can be replaced and give the site manager an itemised certificate for the file.
Why a construction site needs its equipment tested
110V kit takes constant punishment. Yellow leads get run over by plant, dragged through mud and coiled around a forearm. Plugs crack, pins bend and cable sheaths split. On a busy site, damage is normal rather than exceptional.
Transformers are the weak link. A 110V transformer feeding four tools is doing real work all day. Damaged leads, overloaded sockets and cracked casings on the transformer itself are common, and easy to miss when everyone is focused on the job.
Kit is shared between gangs. A grinder moves from one gang to another, a lead disappears into a different van, a charger is borrowed and never returned. Nobody owns the damage, so nobody reports it.
The welfare cabin is full of appliances. Kettles, microwaves, heaters, hand dryers, chargers and a television, all used by dozens of people a day. It is the most-used electrical equipment on site and the least inspected.
One failed tool stops a trade. A dead breaker or grinder holds up a gang. A tripped circuit in the cabin stops the tea and the charging. Testing finds the weak items before they cost a day's labour.
Principal contractors ask for records. Site managers and principal contractors often want evidence that equipment is maintained, and the certificate goes straight into the site file.
What we test on a construction site
We test what plugs in, in the compound and on the floors.
- 110V drills, grinders, saws, breakers and SDS hammers
- 110V transformers and distribution units
- 110V and 230V extension leads and reels
- Task lights, lead lights and site lighting where plug-in
- Battery chargers, radio chargers and tool batteries with mains adaptors
- Generators and their power supplies by arrangement
- Welfare cabin kettles, microwaves, fridges and heaters
- Hand dryers, fans and dehumidifiers
- Site office computers, printers, scanners and card readers
- Site radios, speakers and televisions
- Vacuums and cleaning equipment
- Extension leads, adaptors and multi-way sockets
Anything with a mains plug can be tested. Hard-wired equipment — fixed distribution, tower crane supplies, site lighting circuits — needs separately agreed testing. Tell us what is fixed and we will quote.
What happens on the day
- Book a slot at book online or by phone. Early morning, after the shift or a quiet Friday all work.
- Tell us the site and the count. Compound, cabins, floors and how many gangs are working.
- We test on site. Visual check, then the appropriate tests. Every item labelled, every result recorded by gang or location.
- You get the certificate. PDF by email, itemised, ready for the site file and the principal contractor.
We work around the programme. If a tool is in use, we come back to it. If a transformer cannot be powered down, we agree a time and record it as deferred rather than marking it passed.
Simple, fixed pricing
Every visit includes travel, testing, pass and fail labels, small repairs needed to pass, new plugs and fuses, and the certificate by email.
- 1–20 items: £49 + VAT
- 20–50 items: £59 + VAT
- 50–200 items: first 50 items £59 + VAT, then 89p + VAT per extra item
- 200+ items: first 50 items £59 + VAT, then 79p + VAT per extra item
- 2,000+ items: call for a bulk quote
A small residential site usually lands in the second band. A large site with several gangs, transformers and cabins sits in the third or fourth. Contractors running multiple sites can book consecutive days and pay one travel cost.
See prices for the bands and PAT testing for what is covered.
Why site managers choose PatTest.com
- We test in the compound. No courier, no depot, no tools disappearing for a week. Testing happens where the kit is stored and used.
- 110V experience. Transformers, yellow leads and 110V tools are everyday kit for us, not a special request.
- Records by gang or location. The certificate is itemised so it matches how the site is run and how the file is audited.
- Family-run since 2014. Founded by Ryan Facer, an electrical engineer with a hospital-equipment background. City & Guilds 2377 trained and fully insured.
- Out-of-hours at no extra cost. Before the shift, after it, or at weekends, so the programme keeps moving.
- Small faults fixed on site. New plug, new fuse, re-terminated lead — sorted there and then where it is safe.
Questions site managers ask
How much does PAT testing for a construction site cost? £49 + VAT covers up to 20 items and £59 + VAT covers up to 50. After that it is 89p + VAT per item. Travel, labels, small repairs and the certificate are included.
Do you test 110V equipment? Yes. Tell us how many transformers and leads you have so we bring the right test equipment.
Can you test on a live site? Yes. We work in the compound and around the programme, and record anything we cannot access as deferred.
How often should site kit be tested? Most sites book every three to six months, depending on the programme and how much kit moves between gangs. We will recommend based on your setup.
Do you test welfare cabins? Yes — kettles, microwaves, heaters, hand dryers and chargers are some of the most-used items on site.
What happens if something fails? It is labelled, taken out of use and reported to the site manager. Plugs and fuses are often fixed on the spot; anything more serious is listed so it can be replaced before it stops a gang.
We cover Northamptonshire, Leicestershire, Milton Keynes, Bedford, Warwickshire, Nottinghamshire, Oxfordshire, Wiltshire, Birmingham, Reading, Bristol, Derby and Luton, with engineers nationwide for contractors and multi-site projects. Call 03333 444 722, email info@pattest.com or book at book online with your site details.